C900 HEAD GASKET Replacement
I first started with the easy stuff. It's so easy that I didn't even take any pictures of it.Drain coolant from cylinder head and from the radiator.
To drain the cylinder head, you can unscrew the temp sensor and the big bolt
under the head.Remove all turbo piping from the car.
Remove clutch cover.
You have to remove the clutch cover so you can rotate the engine and unscrew the bolt that goes to the throttle body.
Remove distributor and wires.
Unscrew AIC valve from head, but leave the hoses attached to the throttle body.
At this point your car should look like this: