WHAT'S NEW Home FAQ'S FIX MY C900 FIX MY 9000 FIX MY 9-5 JEFF'S SPG LINKS DIY OIL OTHER
Drop Down Navigation Menu by Vista-Buttons.com v4.5.0



Top of Screen Intro Step 1 Step 2 Step 3 Step 4 Step 5

C900 Instrument Cluster
Extra Items of Interest


There is a blank bulb insert that is located next to the bulb for the low-fuel light. It is connected to the small single wire harness to the left of the speedometer.

Please write me an email if you know what this connector/bulb is used for. Apparently, my car is not equiped with it.


The dash light dimmer pot can be removed and cleaned with rubbing alcohol.

Although I've never seen this go bad, there is no reason not to clean it if you can.


Sometimes, the printed circuit for the tachometer will work itself loose.

Make sure all six "wires" are in place and tight. You can test this by attaching the cluster to the wiring harness before tightening the cluster back into place.


Use a can of compressed air to clean any dirt from the turbo gauge vacuum connector.



Top of Screen Intro Step 1 Step 2 Step 3 Step 4 Step 5